o
Carefully slide the dishwasher in the aperture cut-out.
o
Adjust the screw to balance the appliance and to ensure the
aesthetic panel aligns with the cabinet.
o
Take out the cap, as shown in the above diagram, to reveal the
fixing hole.
o
Fix the screws on both sides to ensure the dishwasher cannot be
moved from the cabinet.
o
Replace the cap.
Connecting to the mains water supply
34
ed.
IMPORTANT: Do not connect the appliance to your mains
water supply using an old or an existing water inlet hose.
The inlet hose supplied with the dishwasher is the ONLY one
that should be us
o
Connect the inlet hose to the inlet valve on the rear of the
product. Please refer to the photographs above to see the
correct position that the inlet hose should be in when connected.
o
Connect the water inlet hose to a
threaded water tap that has a 3/4”
thread.
o
Fully tighten the inlet hose to the water
tap and the dishwasher.
