o
IMPORTANT:
The indent on one end of the side racks, must be
positioned at the front of the oven cavity (as shown in the above
picture).
o
Fully retighten the front nuts
(D)
.
Replacing the oven bulb
IMPORTANT: The oven must be disconnected from
your mains supply before you attempt to either
remove or replace the oven bulb.
o
Remove all oven shelves, drip trays and the side rack that is on
the same side as the oven light.
o
Remove the light cover by removing the 4
screws located in the corners of the glass
cover.
o
Place the glass cover gently on a supported
surface, so that damage is not caused to it
whilst the bulb is being replaced.
o
Unscrew the bulb and remove it from its holder.
o
Replace the bulb with a 25 W/300°C, E14 screw
type pigmy.
o
Do not
use any other type of bulb.
o
Place the lamp cover back into position and fully tighten the 4
screws that were removed previously.
o
Replace the side rack, drip trays and oven shelves.
o
Restore power to the appliance.
35
Summary of Contents for BCS460SS
Page 1: ...I 1 BCS460SS 46 cm combi steamer touch control oven...
Page 8: ...Specifications 8...
Page 44: ...2 2...
