Baumatic BCS460SS, User Manual

Page: 32 / 44

32
o
Use the oven setting selection buttons (9) until SETTINGS
appears on the display. Press the confirmation button (8) to
confirm your choice.
o
Use the oven setting selection buttons (9) until START THE
CLEANING CYCLE appears on the display. Press the confirmation
button (8) to confirm your choice.
o
Use the oven setting selection buttons (9) until COOKING
CHAMBER appears on the display. Press the confirmation button
(8) to confirm your choice.
o
Follow the instructions that appear on the display. The cavity will
be filled with a quantity of steam for approximately 10 minutes.
o
When the cleaning cycle is finished, use a damp soft cloth or
damp non-abrasive sponge to wipe over the cavity of the oven.
Boiler descaling
The purpose of this feature is to remove any limescale that may have
built up in the steam boiler.
o
IMPORTANT: We recommend that you use distilled water in the
water jug, this will minimise the chances of limescale building in
the first place.
o
If you do use your household water supply to fill the water jug
with, then over a period of time, limescale will start to build in
the steam boiler.
o
Eventually if limescale builds to a particular level, when you
switch on the oven, the message DESCALING CYCLE
RECOMMENDED FOR BOILER will appear on the display.
o
The boiler descaling cycle has a fixed duration of 12 hours,
therefore we suggest that you run it overnight.
o
Fill the water jug up to the 1.2 litre mark. DO NOT fill the jug
right to the top. Otherwise the water that is pumped back into
the jug at the end of a cooking cycle may overflow.
o
Add 5 teaspoons of citric acid monohydrate (available from a
pharmacy) to the water jug and stir it until it dissolves.
o
IMPORTANT: Do not use vinegar or any vinegar based products
to descale the boiler.
o
Insert the water jug into the water jug compartment.