If the legs are not used and the cooker is mounted onto a plinth, fit transit legs to allow for
clearance.
Once legs are adjusted to a nominai cooker height of 91 Omm, fit the antitilt restraint
bracket.
1. Fit flat strap to rear of cooker at the centre point on lower edge using supplied screw
2. Mark centre position of the cooker installed position on floor
3. Measure from rear most point hob to mount point of strap. (Dimension A), then using
Dimension A mark back edge of the bracket on centre line. Use bracket to mark fixing
point.
4. Fix restraint bracket to floor at position marked. Use suitable fixing.
Note: For concrete floor, use anchor provided. For other construction use a suitable
Summary of Contents for BAU95EE
