6 SERVICE AND
MAINTENANCE
6.1 Service
^
DANGER
When servicing cutting wheel, it will be
necessary to work underneath stump
grinder� Be sure to support grinder
frame with safety stands to prevent
accidental lowering� Do not position
stands under cutting wheel because it
can rotate�
^
WARNING
Clean machine thoroughly before service or
maintenance procedures�
The health effects from exposure to wood
dust are due to chemicals in the wood or
chemical substances in the wood created by
bacteria, fungi, or molds�
^
WARNING
Prevent serious injury or death caused
by unexpected movement:
1�
Park tractor on a level surface�
2�
Engage tractor park brake�
3�
Disengage PTO�
4�
Shut off engine and remove key�
1. Park tractor and grinder on a level surface.
2. Lower grinder to the ground.
3. Support grinder frame with safety stands.
4. Shut off engine and remove key.
5. Inspect cutting teeth for damage. Replace
individual teeth as needed.
6. Remove lock nut (A) and cutting tooth (B).
7. Install replacement tooth and lock nut. Tighten
lock nut (A) to 150 lb/ft (204 Nm) of torque.
B
A
Note
:
Parts breakdown can be found on
BaumaLight’s website.
www�baumalight�com
r
ePlace
c
Utting
t
eeth
20
