5.4 Attaching Stump
Grinder To Tractor
^
WARNING
To prevent injury or machine damage
put transmission in “Park” and check
the full range of hitch for interference,
binding or PTO separation�
Never position yourself between tractor
and stump grinder�
Only experienced and properly trained
operator’s should operate the tractor
and stump grinder�
1. Read ALL Safety instructions.
2. Check for loose teeth or any other loose parts.
3. Verify there is sufficient visibility and
maneuverability to move up to the stump
grinder.
4. Verify pins are secure in the correct position.
5. Attach tractor to stump grinder. See tractor
Operator’s Manual.
6. Pull collar (A) back toward the grinder. Align
splines on tractor PTO shaft and driveline by
rotating grinder driveline. Push driveline onto
PTO shaft until it snaps into place.
7. Pull back on driveline to make sure it is locked
on shaft.
8. Attach safety shield chain (B) as shown.
A
B
A. Manual Storage Tube
B. 3-Point Top Link
C. Cutting Wheel Shield
D. Debris Shield
E. Cutting Wheel
F. Parking Stands
5.3 Machine Components
A
B
C
D
E
F
F
14
