Baumalight MS348 Operator'S Manual Download Page 26

8 WARRANTY

This product is warranted to be free of defects in materials and workmanship under normal use and 

service, for a period of one year from the date of purchase, when operated and maintained in accordance 

with the Operating and Maintenance Instructions supplied with this unit.  This warranty does not cover 

misuse or negligence.

Under no circumstances will the manufacturer be liable for any consequential damage or expense of any 

kind, including loss of profits.   The manufacturer is under no circumstances liable for skid steer damage 

of any kind.  The manufacturer is not liable for the maintenance of the product.

This warranty is extended only to the original purchaser.  Warranty is void if repairs are attempted by 

anyone other than an Authorized Service Center.

If a difficulty develops with the product, you should contact your nearest Authorized Repair Center, or 

distributor. Only these locations are authorized to make repairs to the product or affect the replacement of 

defective parts, which will be done at no charge within a reasonable time after the receipt of the product.  

Units or parts should be returned at the customer’s expense to the nearest repair location or Authorized 

Service Center.  Pack unit in a strong carton and pad tightly to avoid damage.  Damage in-transit is not 

covered by warranty.  Include original purchase receipt with any claim (keeping a copy for your files).

The Manufacturer’s Liability  is limited to repair of the product and/or replacement of parts and is given to 

the purchaser in lieu of all other remedies including incidental and consequential charges.  There are no 

warranties, expressed or implied other than those specified herein.  For the nearest Authorized Service 

Center call the manufacturer.

Please note the following details and file this information in an appropriate place.

Model Number: ___________     S/N:_______________

Date of Purchase: _____________     Owner’s Name__________________________________ 

24

Summary of Contents for MS348





























Reviews: