4. Inspect belt (B) for wear, damage, alignment
and proper tension.
5. Loosen hydraulic motor mounting bracket and
adjust tension bolts to set belt tension. Tighten
motor mounting bracket.
6. Belt deflection (C) should be 0.5 in. (13 mm)
at 3.0 lbs of force for a used belt or 4.25 lbs of
force for a new belt.
7. Place a straight edge (D) on motor pulley and
rotor pulley. Pulleys must be aligned or belt will
wear quickly. Adjust pulleys if necessary.
C
D
B
8. Close inspection cover (A). Do not operate
mulcher with inspection cover (A) open or
removed.
5.3 Check Belt Tension
1. Lower mulcher to ground.
2. Set parking brake, stop engine and remove
key.
^
WARNING
Moving parts can crush and cut�
Keep clear of moving components�
Follow lockout procedure before
servicing�
3. Open inspection cover (A).
18