5 SERVICE And MAINTENANCE
5.1 Maintenance
Maintenance Chart
General Inspection
Inspect the unit for any buildup of
contamination (dirt, stones, etc.).
Daily
Cutting Teeth
Check and rotate or replace one at a
time as necessary. With daily use expect
to replace 4 to 6 teeth per day. (See
Replace Cutting Tooth in this section.)
Every 4 hours.
5.2 Inspections
^
WARNING
Prevent serious injury or death caused
by unexpected movement:
1�
Park skid steer on a level surface�
2�
Engage skid steer park brake�
3�
Disengage hydraulic drive�
4�
Shut off engine and remove key�
^
WARNING
Clean machine thoroughly before
service or maintenance procedures�
The health effects from exposure to
wood dust are due to chemicals in the
wood or chemical substances in the
wood created by bacteria, fungi, or
molds�
Inspect the unit for any buildup of contamination
(dirt, stones, etc.).
Check cutting teeth every 4 hours of use. Keep
cutting teeth in good condition. Unit will cut faster
and remaining teeth will last longer if broken teeth
are replaced.
17