K5B - 13
Block Programming
5.0 Automatic Operation
Example: Variation 1, selection: Four trim cut
1.
Select
"Four trim cut"
2.
Menu:
1 Orig. sheet size
2 Sheet size tables
3 Lay guide lft / ri
With this menu it is able to enter the original sheet size manually or to select a
sheet size from a sheet size table.
3.
e.g.:
Enter Orig. sheet size
4.
Enter Original sheet size X, confirm with key
5.
Enter Original sheet size Y, confirm with key
6.
or e.g.
: Sheet size tables
7.
Select left-hand lay side (=default) or right-hand lay side:
Example:
Select right-hand lay side by means of key
8.
Select desired sheet size by means of the cursor keys and confirm with
key
Confirm the
sheet orientation
or turn sheet orientation (observe paper grain)
Menu:
1 Sheet orient. OK
2 Turn sheet
8.
e.g.: Sheet orient. OK
Enter Edge trim
9.
Enter "Edge trim width X", confirm with key
10.
Enter "Edge trim width Y", confirm with key
11.
Finish entry with key
"Enter"
< Program data display appears with a graphic window of the current
Block Programming variation (visible sheet orientation with order start),
see also page K5D - 3 "Graphics OFF">
Four trim cut
Summary of Contents for BAUMCUT 31.5
