Baum BAUMCUT 31.5, Operating Instructions Manual, Page: 72 / 104

K5B - 12
5.0 Automatic Operation
Block Programming
Confirm the sheet orientation or turn sheet orientation (observe paper grain)
Menu: 1 Sheet orient. OK
2 Turn sheet
9. e.g.: "Sheet orient. OK"
Enter Edge trim
10. Enter "Edge trim width X", confirm with key
11. Enter "Edge trim width Y", confirm with key
12. Finish entry with key "Enter"
< Program data display appears with a graphic window of the current
Block Programming variation (visible sheet orientation with order start),
see also page K5D - 3 "Graphics OFF"
Selection of an input parameter with Block Programming
Actuate cursor keys until desired parameter appears
Correction of an input parameter with Block Programming
1. Select parameter with cursor keys
2. Enter new parameter (old parameter is erased)
3. Press key
Attention!
Function "Help":
Explanation of pictographs and
description of functions
Deletion of an input parameter with Block Programming
1. Enter Block Programming (initial fig.)
2. Press key "Delete"