Do not allow children to use the laser measuring tool without supervision.
They could unintentionally blind other persons or themselves.
Do not operate the measuring tool in explosive environments, such as in the
measuring tool which may ignite the dust or fumes.
The measuring tool is intended for determining and checking horizontal and
vertical lines.
The measuring tool is suitable exclusively for operation in enclosed working
sites.
Product Description and
Intended Use
Product Features
The numbering of the product features shown refers to the illustration of the
measuring tool on the graphic page.
CROSS LASER LINE
1 Exit opening for laser beam
2 Automatic levelling indicator
3 On/Off switch
4 Latch of battery lid
5 Battery lid
6 Laser warning label
7 Tripod mount 1/4"
8 Laser viewing glasses
9 Tripod
* The accessories illustrated or described are not included as standard
delivery.
The safe use of this product requires an understanding of the information
on the tool and in this instruction manual, as well as knowledge of the
project you are attempting. Before use of this product, familiarize your-
self with all operating features and safety rules.
Power switch
Push the power switch up to turn the self-levelling cross-line laser level
on,and slide the power switch down to turn the tool off (fig 1).
To install batteries (fig 2)
The battery compartment holds two “AAA” batteries.
1. Push the latch to open the battery cover.
2. Insert two new “ AAA” alkaline batteries,following the polarity (+/-) as
indicated on the pole plate.
3. Securely close the cover.
Technical Data
Cross laser line
NLC02
Power
3 V, 2-AAA Battery
Working time
＞
15 h
Laser wave length
635 nm
Laser power
Class 2,
＜
1 mw
Laser line width
100 LUX, 3 mm/ 5 m
Working range
10 m
Accuracy
±0.5 mm/ m
Leveling time
＜
5 s
Leveling range
＞
3°
Working temperature
0-40º C
Dimensions (length x width x height) 66 mm x 56 mm x 65.5 mm
