3
WARNING!
•
Indoor use only
•
Do not expose to water, heat, or direct sunlight
•
Do not install in a confined space. Ensure the equipment is
well ventilated
•
Unplug the equipment when unused for a long period of time
•
Clean only with a dry cloth and disconnect from the mains power
while cleaning
•
Only connect the power adaptor supplied in the pack
•
No user serviceable parts – do not open the device housing
12
I.
General information
and safety instructions
For correct use and safe operation of this product, please read this manual and safety
information carefully and follow all instructions. This product is approved to Australian
standards. Internal manipulation of this product or any modification to this product is
forbidden, due to safety, security and electrical authority approval issues.
If this product is used improperly or if you have opened, altered and repaired the product
yourself, all warranties expire. The warranty is limited to defects in workmanship and
parts. The supplier does not accept responsibility for any consequential loss or damage.
Young children should use the device only under adult supervision. No guarantee or
liability will be accepted for any damage caused due to incorrect use of the equipment
supplied, other than indicated in this owner’s manual and the included warranty card.
If you do have any problems with this product, or are having trouble with set up, please
contact Winplus Australia on 1300 663 907.
After Sales Support
TEL:
1300 663 907
After Sales Support
TEL:
1300 663 907
Repeat playback
Press the repeat (16) or random (18) button to perform the repeat playback function for
your iPhone / iPod.
Charging
When your iPod or iPhone is docked on the unit, the battery will begin charging.
IX. Playing from Auxiliary input
Connect another audio device to the Micro Hi Fi via a cable with 3.5mm jack plug (not
supplied). You may wish to connect an mp3 player, portable cassette player or computer
input.
1. Connect one end of this cable to the headphone jack on the external device and the
other end to the aux-in jack (23) on the side of the Micro Hi Fi.
2. Press function button (6) to select auxiliary mode. The LCD display will show “AUX”.
3. The Micro Hi Fi will play the input from the connected auxiliary device.
X. Advanced use
Sleep function
Set the timer for your music to stop playing after a given time.
1. Press the “sleep” button (9) and the sleep indicator will be displayed on the LCD.
2. Keep pressing the “sleep” button to adjust the sleep timer. The number of minutes
playing time before switching off will be displayed on the LCD screen. You can set
the timer for up to 90 minutes.
3. When the desired time delay is displayed on the screen, do not press any more
buttons. The system will return to regular playback.
4. The Micro Hi Fi will stop playback and enter standby mode automatically after the
selected time is up.
5. To cancel the sleep function, press “sleep” button until the “sleep“ indicator
disappears from the LCD display.
6. To check how many minutes remain on the sleep timer, press the “sleep” button
once, and the remaining time is displayed on the screen.
