Bauer MSXH, Operating Manual, Page: 8 / 52

Operating Manual for BAUER Submersible Mixer/ Version I-2013 8
9. Mounted or trailed machines as well as balancing weights influence road behaviour, steering and braking
capacity. Therefore make sure that proper steering and braking are possible!
10. Consider the projection and/or centrifugal mass of the machine when driving in curves!
11. It is forbidden to stay in the working range of the machine while it is operating !
12. Keep out of the turning and swivelling range of the machine!
13. Only operate hinged hydraulic frames when nobody is in the swivel range!
14. Externally powered machines (e.g. hydraulic) bear a crushing and shearing hazard!
15. Nobody is allowed between the tractor and the implement unless the tractor is secured by the parking brake
and /or by wheel chocks
16. Hinged supports must always be folded up and secured before driving away!
17. Secure the machine and the tractor against rolling!
Tractor-mounted machines:
1. Before a machine is linked to or detached from the three-point linkage, the control device must be shifted to a
position in which unintentional lifting or lowering is impossible!
2. When using the three-point linkage the linkage parameters of both tractor and attached machine must
correspond, if not, they have to be matched accordingly!
3. The three-point linkage bears crushing and shearing hazards!
4. When operating the external control of the three-point linkage never step in-between tractor and the machine!
5.
When the machine is in the transport position always make sure that the tractor’s links are always properly
secured on the sides.
6. When driving on the road with the machine lifted the control lever must be locked against lowering!
Trailed machines
1. When a machine is coupled to the draw bar make sure that the coupling point provides sufficient flexibility!