Bauer MSXH, Operating Manual, Page: 52 / 52

Operating Manual for BAUER Submersible Mixer/ Version I-2013 52
10 CONFORMITY CERTIFICATE
EC Declaration of Conformity
according to EC Directive 2006/42/EC
The manufacturer
Röhren- und Pumpenwerk BAUER Gesellschaft m.b.H.
Kowaldstraße 2, 8570 Voitsberg, Austria
phone +43 3142 200-0; fax: +43 3142 200-320/-340
herewith confirms that the machine component mentioned below
Designation of machine Submersible Motor Mixer MSXH
Machine type / basic units MSXH 5,5; 7,5; 11; 11 Eco; 15
Consists of Submersible Motor Mixer with Ex-Protection
corresponds analogously to the requirements of the Machinery Directive 2006/42/EC.
In case of a modification of the machine not accorded with BAUER GmbH, this declaration will cease to be
valid.
The following standards as amended have been applied analogously:
DIN EN ISO 12100-1 Safety of machines
– Basic concepts, general principles for design, Part 1: Basic
terminology, metodology
DIN EN ISO 12100-2 Safety of machines
– Basic concepts, general principles for design,
Part 2: Technical principles and specfications
DIN EN 60204-1 Safety of machines - Electrical equipment of machines,
Part 1: General requirements
EN ISO 14121-1 Safety of machines
– Risk assessment
Norms related to products
EN ISO 13857 Safety of machines, safety clearance to secure no touching hazard area with
upper extremities.
DIN EN 349 Safety of machine, minimum clearance to avoid crushing body parts
DIN EN 809 Pumps and pump units for liquids - Common safety requirements
The documents belonging to the machine according to annex VII, part B have been attached.
The machine component must not be put into operation unless it has been proven that the machine where the
machine component shall be installed, corresponds to the regulations of the EC Machinery Directive
(2006/42/EC). The CE mark is applied by the operator as final manufacturer.
Person in charge of documentation:
Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria,
Technical Designer in Charge Commercial Manager