Bauer MSXH, Operating Manual, Page: 38 / 52

Operating Manual for BAUER Submersible Mixer/ Version I-2013 38
LUBRICATION AND MAINTENANCE SCHEDULE
Always turn power off when changing oil or lubricating, and secure the mixer from unintentional switching on.
Interval after 750 operating hours every six months after 2000 houres
OIL CHANGE /
OIL CHECK
First oil change: unscrew filling
bolt too for complete draining.
Tightening torque for filling and
drain bolts:
M16x1.5 = 34 NM Remove level checking screw
and check oil level and quality.
(The colour of the oil must not
be white!)
Tightening torque for filling and
drain bolts:
M16x1.5 = 34 NM Change oil
Unscrew filling bolt to allow
complete emptying at
draining hole.
Tightening torque for filling
and drain bolts:
M16x1.5 = 34 NM
Rope winch
Clean, lubricate and check
wear
Electric cable
and general
overhauling Tighten bolts and nuts Check wear, twisting and
possible rupture. Tighten bolts
and nuts.
Level control
probes Tighten hose clips of
connections Clean and check hose
connections of probes
Oil quality : SAE 90 gear oil; quantity: 6.5 l
Shell Spirax S2 G 80W-90
Attention: An overpressure may be created inside the oil casing.
OIL CHANGE
1. Unscrew bolts 1, 2 and 3
2. Drain oil
3. Put back bolts 1 and 3
4. Fill in oil up to level checking screw 2 according to instructions.
5.
Put back level checking screw 2.
Wrap thread of bolts and screws with teflon tape or muffle it with thread sealant
before screwing to ensure absolute leak tightness.
2
1
3
1
CAUTION !