Operating manual
BAUER Submersible Motor Pump
/ Version X-2010
15
Move: key
or
Finished: key OK
Change value: key
or
1.1.1 Current time of timer
The status of the timer is displayed
Timer OFF
(Status 0 at the exit)
timer ON
(Status 1 at the exit)
The status of the timer depends on all three cams
No1, No2 and No3.
In order to get access to the mode parameter, press the key ESC -> LOGO changes to the mode
parameter and displays the parameter menue.
Choose „
SET PARAM
“ key AB and OK.
1. In order to change a parameter, choose one parameter
2. Put the cursor to the position you want to change: keys RIGHT or LEFT.
3. Change the value at the position: keys UP or DOWN
4. Confirm value with the key OK.
Weekly timer:
Time of the interval TH = exposure time TL = time of break (if the timer is active)
Meter for hours of operation:
Display of the expired hours of operation
4.3.7 Malfunction
The
red
pushbutton is alight: The motor protection has switched off the motor.
Eliminate the cause of the fault.
Turn selector to “0“, the red pushbutton goes out and the alarm horn stops.
Motor cannot be started:
Check power supply.
Check control power fuse “F3“.
4.3.8 Safety instructions
Always disconnect system from power before working on the starter.
In the automatic mode the motor starts up without a warning!
Mount a safety sign!
WARNING!
Parameter
The set value of the parameter
Effective value of time in LOGO!