G 120 II V
Page 108
1st Edition, Rev. 0 Chg. 2
8.2
Unpacking, Handling and Installation
8.2.1
Unpacking and Handling
This compressor unit is packaged according to the requirements for shipping via the requested type of
carrier service. It is possible that the compressor unit could have been damaged during shipping. For this
reason, we urge you to thoroughly examine the unit for possible damage and report any such damage to
the shipping company immediately.
Care must be taken in unpacking the compressor unit. Serious damage could result by not checking for
clearance between the item being unpacked and the packaging to be removed.
Handling of the unpacked unit should be performed using only the following devices. See Figure 8-1.
The compressor unit may be furnished with one or more shipping braces for shipping and handling only.
After installation and before operation, these braces must be removed entirely. Under no circumstances
should the braces remain installed during operation or the manufacturer’s warranty for the compressor
unit will be voided. All braces are tagged and labelled.
Figure 8-1
Lifting Devices
1. Forklift
2. Chain Hoist
3. Hand Truck
^
WARNING
Be sure the lifting devices are capable of handling the weight of the unit (see Paragraph 1.4 for the
approximate weight of the unit). Before lifting the unit, secure all loose or swinging parts to keep
them from moving. Stay clear of lifted load.
Fork Lift
Hand Tr
u
ck
Chain Hoist
