11n Repeater User’s Manual
76
Windows Me PCs
1. In the Windows task bar, click the
Start
button, point to
Settings
, and then click
Control Panel
.
2. Double-click the Network and Dial-up Connections icon.
3. In
the
Network and Dial-up Connections
window, right-click
the Network icon, and then select
Properties
.
The
Network Properties
dialog box displays with a list of
currently installed network components. If the list includes
Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 11.
4. If Internet Protocol (TCP/IP) does not display as an installed
component, click
Add…
5. In
the
Select Network Component Type
dialog box, select
Protocol
, and then click
Add…
6. Select
Microsoft
in the Manufacturers box.
7. Select
Internet Protocol (TCP/IP)
in the Network Protocols
list, and then click
OK
.
You may be prompted to install files from your Windows Me
installation CD or other media. Follow the instructions to
install the files.
8. If
prompted,
click
OK
to restart your computer with the new
settings.
Next, configure the PCs to accept IP information assigned by
the Wireless Gateway:
9. In
the
Control Panel
, double-click the Network and Dial-up
Connections icon.
10. In
Network and Dial-up Connections window
, right-click the
Network icon, and then select
Properties
.
11. In the
Network Properties
dialog box, select
TCP/IP
, and
then click
Properties
.
12. In the TCP/IP Settings dialog box, click the radio button
labeled
Server assigned IP address
. Also click the radio
button labeled
Server assigned name server address
.
13. Click
OK
twice to confirm and save your changes, and then
close the
Control Panel
.
Windows 95, 98 PCs
First, check for the IP protocol and, if necessary, install it:
1. In the Windows task bar, click the
Start
button, point to
Settings
, and then click
Control Panel
.
2. Double-click the Network icon.
The
Network
dialog box displays with a list of currently
installed network components. If the list includes TCP/IP,
and then the protocol has already been enabled. Skip to
step 9.
3.
If TCP/IP does not display as an installed component, click
Add…
The
Select Network Component Type
dialog box displays.
4. Select
Protocol
, and then click
Add…
The Select Network Protocol dialog box displays.
Summary of Contents for RE300B1
