BaudTec RE300B1, User Manual

Page: 56 / 96

11n Repeater User’s Manual
56
Field Description
Enable SSID
Broadcast Broadcast or Hide SSID to your Network.
Default: Enabled
Enable Wireless
Isolation Isolate your Network.
Default: Disabled
SSID Specify the network name.
Each Wireless LAN network uses a unique Network Name to identify
the network. This name is called the Service Set Identifier (SSID). When
you set up your wireless adapter, you specify the SSID. If you want to
connect to an existing network, you must use the name for that
network. If you are setting up your own network you can make up your
own name and use it on each computer. The name can be up to 20
characters long and contain letters and numbers.
Mode Specify the WLAN Mode to 802.11b mode, 802.11g mode, 802.11b/g
mode, 802.11n mode, 802.11n/g mode or 802.11b/g/n mode
Channel Choose a Channel from the pull-down menu.
Band Width Choose a Band Width from the pull-down menu.
Max
Transmission
Rate Select the Max Transmission Rate from the drop-down list
Security Options Configure the Encryption to None, WEP, WPA-PSK[TKIP] , WPA2-
PSK[AES] or WPA-PSK/WPA2-PSK AES
Security
Encryption(WEP) Authentication Type: Automatic or Shared Keys
Encryption Strength: 64 bits or 128 bits
Security
Encryption(WEP)
Key Select and configure Key 1, Key 2, Key 3 or Key 4
Security
Options(WPA-
PSK) Enter the Pre-Shared Key
Security
Options(WPA2-
PSK) Enter the Pre-Shared Key
Security
Options(WPA-
PSK+WPA2-
PSK) Enter the Pre-Shared Key