Battipav 701200, Operating Instructions Manual, Page: 26 / 26

37
GB Battipav srl
TROUBLESHOOTING
HAVE YOUR TOOL REPAIRED BY A QUALIfIED PERSON
This electric tool complies with the relevant safety rules. Repairs should only be carried out by qualified
persons using original spare parts, otherwise this may result in considerable danger to the user.
Problem Cause Remedy
The machine does not run and
the green running LED does not
come on. The amperometric trip switch has
tripped. Press the reset pin.
The motor high temperature trip
switch has tripped. Wait a few minutes for the motor
to cool down.
The excess current trip switch is
damaged. Contact your local dealer for a
replacement.
The high temperature trip switch
is damaged. Contact your local dealer for a
replacement.
The control switch is damaged. Contact your local dealer for a
replacement.
Lubrication does not reach the The sprayer unit is clogged. Remove the sprayer inside the
disc cover and clean any deposits
off of it.
The circulation pump is
damaged. Contact your local dealer for a
replacement.
The lubrication hose is being
flattened. Eliminate any kinks in the
lubrication hose.
The motor emits unpleasant
smells. Water has filtered into the motor. Contact your local dealer for a
replacement.
The capacitor is damaged. Contact your local dealer for a
replacement.
The motor does not start properly
.
The motor’s bearings are
damaged. Contact your local dealer for a
replacement.
The capacitor is damaged. Contact your local dealer for a
replacement.
The laser marker does not work. The laser unit is damaged. Contact your local dealer for a
replacement.
The marker feeder is damaged. Contact your local dealer for a
replacement.