Battipav 701200, Operating Instructions Manual, Page: 19 / 26

30
GB Battipav srl
A
B
C
G
E
D
f
MACHINE DESCRIPTION
The DYNAMIC site cutter is a machine intended
specifically for cutting bricks, natural stone, granite,
concrete items and similar materials, up to a
thickness of 200 mm.
The machine uses a wet diamond tipped tool cutting
system and is intended for personnel specialized in
the construction sector.
The operator works in front of the narrow side of
the machine, within reach of the operating controls,
and positions the material to be cut on the moving
worktop. He/she starts the machine and moves the
cutting head to bring the tool into contact with the
material.
TECHNICAL DATA
Voltage: 230V 50Hz~
Power absorbed: 2,2 Kw
Admissible working conditions:
INTERMITTENT SERVICE S6 40%
40% under load running
60% loadless functioning
Rotation speed: 2800 min-1
Amperometric circuit breaker: 13 A
Thermal circuit breaker: 160°C
IP Degree: 54
RECOMMENDED USE:
CUTTING TOOL
DIAMOND BLADE WET CUTTING
CONTINUOUS CROWN:
ceramic, marble, stone, single-fired ceramic
LASER/SECTORS:
cement, natural stones, granite, abrasive materials
TURBO:
cement, natural stones, granite, refractory.
THE TOOL / MATERIAL TO BE CUT MATCHES ARE
PURELY INDICATIVE.
ALWAYS fOLLOW THE INTENDED USE
INDICATIONS PROVIDED BY THE CUTTING TOOL
MANUfACTURER BEfORE ANY APPLICATION.
Water recirculation pump: S2 230V 50/60Hz
The noise level of the machine has been measured in
compliance with standards UNI EN12418, EN3744.
LW - SOUND POWER LEVEL = 79.8/0.0 dB(A) /mW(A)
LOP - SOUND POWER LEVEL AT THE OPERATOR
POSITION= 68.5 dB(A)
LOP Max - PEAK SOUND POWER LEVEL AT THE
OPERATOR POSITION= 80.7 dB(C)
Measurements have been performed without load
and at maximum speed using a cutting tool with a
diameter of 350 mm, sectors type, Art. 867.
In working conditions, the machine creates a noise
emission above 85 dB(A).
The level of vibration transmitted to the hand-arm
system has been measured according to standard
UNI EN ISO 5349-1 while cutting poroton bricks.
(L 280 x W 140 x H 100 mm) using a cutting tool with
a diameter of 350 mm, sectors type, Art. 967.
-Acceleration analysed at =1.15 m/s2 (measurement
uncertainty 0.28 m/s2)