ENGLISH
pag. 41
instruction manual
for use and maintenance serie MEC, STAR, AGRI
3.6 DISINSTALLATON
The Rotary blades vacuum pump should be disinstalled using the following procedure:
…/M-K
…/P
…/D
…/H
1) Stop the power take-off of
the tractor;
2) Remove the cardan shaft
from the power take-off of
the rotary blades vacuum
pump;
3) Remove the connecting
pipe that joins the rotary
blades vacuum pump to the
tank car, by loosening the
metal band and sliding the
pipe from the adjustable
elbow;
4) Remove any hydraulic
connections;
5) Remove the clamping
screws and disinstall the
rotary blades vacuum
pump.
1) Stop the power take-off of
the tractor;
2) Remove the driving belts.
3) remove the pipe that
connects the rotary blades
vacuum pump to the tank
car. To accomplish this,
loosen the metal clamp
and pull the pipe out of the
elbow;
4) remove any plumbing
connections;
5) remove the mounting
screws and remove the
rotary blades vacuum
pump.
1) Stop the power take-off of
the tractor;
2) Remove the cardan shaft
from the power take-off of
the rotary blades vacuum
pump.
3) remove the pipe that
connects the rotary blades
vacuum pump to the tank
car. To accomplish this,
loosen the metal clamp
and pull the pipe out of the
elbow;
4) remove any plumbing
connections;
5) remove the mounting
screws and remove the
rotary blades vacuum
pump.
1) Stop the hydraulic system;
2) Remove the hydraulic
connections to the motor.
3) remove the pipe that
connects the rotary blades
vacuum pump to the tank
car. To accomplish this,
loosen the metal clamp
and pull the pipe out of the
elbow;
4) remove any plumbing
connections;
5) remove the mounting
screws and remove the
rotary blades vacuum
pump.
3.7 DISASSEMBLY
3.7.1 Back disassembly
SERIE MEC 1000-1600-2000-3000-4000-5000-6500-8000
1) Remove the back cover or the lubrication pump (together with the connector joint) from the flange;
2) Remove the screws from the back flange;
3) Use two screws for screwing into the threaded extraction holes until the flange is removed;
SERIE MEC 9000-11000-13500
1) Remove the rear cover or oil pump (together with the connecting joint) from the flange;
2) Remove the seeger ring from the rear pin;
3) Remove the screws from the rear flange.
4) Screw two screws into the threaded extraction holes just until the flange can be removed;
STAR - AGRI /V (with rear cast iron oil tank)
STAR - AGRI /F (with rear flange and extractable side sheet oil tank)
1. Remove the tank cover and the lubrication pump (together
with the connector joint) from the back tank;
2. Remove the screws from the back tank;
3. Use two screws for screwing into the threaded extraction
holes until the tank is removed;
1. Close the oil cock placet on the tank
2. Remove the back cover with the lubrication pump (together
with the connector joint) from the flange;
3. Remove the screws from the back flange;
4. Use two screws for screwing into the threaded extraction
holes until the flange is removed;
