Rev. A-051007
P/N VDC36271-MNL
BatteryMINDer
®
Model 36271
Page 7
DO NOT CONNECT CLIP TO CARBURETOR,
FUEL LINES, OR SHEET METAL BODY
PARTS.
Connect to heavy gauge metal part of frame or
engine.
h. When disconnecting charger, disconnect char-
ger from AC outlet, then remove clips from vehicle
chassis, and battery posts.
Operating instructions for charge information.
FOLLOW THESE STEPS WHEN BATTERIES
ARE OUTSIDE OF VEHICLE OR EQUIPMENT.
A SPARK NEAR THE BATTERIES MAY CAUSE
BATTERY EXPLOSION. TO REDUCE RISK OF
A SPARK NEAR BATTERIES:
a. Check polarity of battery posts. POSITIVE
(POS,P,+) usually has a large diameter than
NEGATIVE (NEG, N, -) battery post.
b. Connect (
RED
) charger clip to (POS+) post of
battery.
c. Position yourself and free end of cable as
far away from battery as possible, then connect
NEGATIVE (
BLACK
) charger clip to free end of
cable.
d. Do not face batteries when making final con-
nections.
e. When disconnecting charger, always do so in
reverse sequence of connecting procedure and
break first connection while as far away from bat-
teries as practical.
DO NOT ATTEMPT TO PERMANENTLY
INSTALL ANY CHARGER NOT SPECIFICALLY
DESIGNED FOR PERMANENT
INSTALLATION, ESPECIALLY IN A WET /
MARINE ENVIRONMENT
