Rev. A-051007
P/N VDC36271-MNL
BatteryMINDer
®
Model 36271
Page 21
INSTRUCTIONS:
TEMPERATURE SENSOR Type: ABS-248
(At-the-Battery Sensor)
If batteries are being charged or maintained
in temperatures as low as 32°F to a high of
125°F this sensor must be used.
Congratulations on purchasing the most advanced
charger-maintainer-desulfator conditioner on the
market today. Read you manual carefully to under-
stand all of its features.
Your temperature sensing system is made up
of two components. The thermal sensor w/ ring
terminal and male plug w/ dust cover both shown
below with extension cord attached. This cord
then attaches directly to the mating female recep-
tacle located on the charger. It can be attached to
any one of the batteries.
Do NOT modify by extending or shortening
the extension cord.
Attaching the temperature sensor with extension
cord (11’-8”) to any of the batteries.
Your first choice should be to connect it to the
positive (+) or Negative (-) post (clamp or screw) of
any one battery. This is the best location to sense
the temperature of a battery.
The second choice is to place it as close to a
battery as possible. Attachment of the sensor to
the side or top of battery is also a possible option,
under the right circumstances. Be careful to ensure
it will not come loose in service.
