Charging Instructions:
To charge the battery plug into a 120V power supply when the cart is not in use.
Troubleshooting:
Pump will NOT run:
1. Check inline fuse on the wires on the pump. If blown, replace with new fuse (5 Amp
mini-blade fuse).
2. Make sure the on/off switch is in the “ON” position (the power switch is located on the
wiring harness).
3. Make sure the battery is fully charged.
4. Ensure a tight connection at the battery clips.
Pump runs, but does not prime:
1. Check line strainer (screen) at the inlet location (at the tank). You will need to unscrew the
knurled nut to access this screen. The tank should be empty while performing this, otherwise
you may have to tilt the tank backward so water will be away from the inlet location.
2. Remove the screen and clean it.
Maintenance:
The line strainer (screen) should be removed and cleaned periodically to ensure proper
operation. Before cleaning the screen, empty the water from the tank. Gently clean the screen
with soap and water. Failure to do so may decrease water pressure and flow rates that are
required for proper operation of the watering system.
Warranty
This product is warranted against defects in workmanship and materials for a period of one year
from date of shipment.
CAUTION:
If storing this product in
freezing conditions, drain all of the
water to prevent damage.
