Power Backup Connection: Output Cable
The Freedom
v
2
CPAP Battery can be setup as an uninterrupted battery
backup system for your PAP device in the event of a power outage.
When AC power is available it will bypass the lithium-ion cells of the
battery and power your device normally. If AC power is lost the battery
will recognize this and automatically start powering your PAP device.
Single Battery Connection
■
Plug the power supply into the battery DC IN port.
• If a Power Supply Adapter is required, plug it into the battery
DC IN port and then into the PAP device power supply.
■
Plug the Output Cable into the battery DC OUT port and then into
the power inlet port of the PAP device.
■ Plug the power supply into the wall outlet.
Dual Battery Connection
To begin the dual battery setup battery A must be charged to at least
15%. Battery B can be at any charge level including 0%.
■
Plug the power supply into the DC IN port of battery A.
The charge
level of this battery must be
�
15%.
• If a Power Supply Adapter is required, plug it into the DC IN
port of battery A and then into the PAP device power supply.
■
Plug the Bridge Cable into the DC OUT port of battery A then into
the DC IN port of battery 8.
■ Plug the Output Cable into the DC OUT port of battery 8 and then
into the power inlet port of the PAP device.
■
Plug the power supply into the wall outlet.
12
