Power Backup Connection: Power Inverter
The Freedom
v
2
CPAP Battery can be setup as an uninterrupted battery
backup system for your PAP device in the event of a power outage.
When AC power is available it will bypass the lithium-ion cells of the
battery and power your device normally. If AC power is lost the battery
will recognize this and automatically start powering your PAP device.
Single Battery Connection
■ Plug the Freedom
v
2
power supply into the battery DC IN port and
then into the wall outlet.
■
Plug the Mobile Power Receptacle into the battery DC OUT port.
■
Plug the Power Inverter into the Mobile Power Receptacle.
■
Plug your PAP device power supply/cord into the Power Inverter.
Dual Battery Connection
To begin the dual battery setup battery A must be charged to at least
15%. Battery B can be at any charge level including 0%.
■
Plug the Freedom
v
2
power supply into the DC IN port of battery
A and then into the wall outlet.
The charge level of this battery
must be� 15%.
■ Plug the Bridge Cable into the DC OUT port of battery A then into
the DC IN port of battery B.
■
Plug the Mobile Power Receptacle into the DC OUT port of battery B.
■
Plug the Power Inverter into the Mobile Power Receptacle.
■
Plug your PAP device power supply/cord into the Power Inverter.
Note: Depending on the PAP device being powered, it is normal for the digital
display screen of the batteries to read separate and different voltages. This is
due to the voltage output of the Bridge Cable.
14
