bathstore Comfort Cushion, User Instructions

Page: 9 / 20

9
Connecting the air hose and
hand control
• Connect the air hose from the Comfort
Cushion to the Airflo 12 air outlet socket
(
D
fig. 5).
• Connect the Hand Control (
E
) to the
Airflo 12 hand control socket (
F
).
Dry trials (without water in the
bath)
• Select ‘Up’ on the hand control (
G
fig. 6)
to inflate the Comfort Cushion and when
the relief valve blows (it will hiss), release
the ‘Up’ button. Press firmly down on the
Comfort Cushion to secure the suction
cups to the floor of the bath. Check all four
suction cups are securely stuck to the bath.
Wet them to help them stick if necessary.
• Whilst still clothed and with the help of
an assistant if required, carry out some
dry ‘practice runs’ according to these
instructions until you are totally confident
using the product.
NOTE:
During a ‘dry trial’ the Comfort Cushion
may make a noise when being lowered and
raised due to the fabric rubbing against the dry
sides of the bath, this is normal and the noise
will disappear when the bath is full of water.
G
F
E
D
5
6