bathstore Comfort Cushion, User Instructions

Page: 15 / 20

15
Transportation / Storage
Disconnect the Airflo 12 compressor from the Comfort Cushion before transporting so as to avoid
accidental inflation of the cushion.
Ensure that the Comfort Cushion is clean and thoroughly dry before storing. Failure to thoroughly
dry the Comfort Cushion before storage may result in a build-up of mould on the surface of the
product leading to a weakening of the fabric and consequential invalidation of the product warranty.
Store in a dry environment.
To maintain the Airflo 12 battery when being stored for long periods, put the Airflo 12 on charge
for 16 hours every 3 months.
Disposal / Recycling
When the Comfort Cushion has reached the end of its working life, dispose of it at your local
household waste recycling centre (civic amenity site).
When the Airflo 12 has reached the end of it’s working life, remove the battery for safe disposal
in
accordance with your local council guidelines, and dispose of the Airflo 12 at your local household
waste recycling centre (civic amenity site).
Troubleshooting
Problem Remedy
Compressor does not run when ‘Up’ is selected
on the hand control.
Ensure that the air hose from the Comfort
Cushion is connected to the Airflo 12.
Compressor keeps stopping when trying to
inflate the Comfort Cushion.
Check that there are no kinks in the air hose.
Bottom Battery State Indicator light flashing
‘Red’.
This happens when the compressor’s internal
temperature cut-out has tripped. Leave the
Airflo 12 for 60-90 minutes to cool.
Compressor causes electrical interference
with another piece of electrical equipment.
Move either the compressor or other item
further away from each other until the
interference stops.
For any assistance or further information, go online at www.bathstore.com