P1512120 R3
47
Section 6.8. – Inspect the Hopper Flashing on page 49
Section 6.9. – Check the Roller Bearings on page 49
Section 6.10. – Check the Roller Lagging on page 49
6.13. Inspect Belt Lacing on page 53
Annually:
Section 6.11. – Tension the Conveyor Belt on page 49
Section 6.12. – Align the Conveyor Belt on page 50
Section 6.16. – Clean and Wash the Equipment on page 55
When equipped:
Section 6.5. – Check the Gearbox Oil on page 48
2–3 Years:
6.14. Replace the Belt Lacing on page 53
When equipped:
Section 6.6. – Change the Gearbox Oil on page 48
As Required:
Section 6.17. – Tension the Drive Belts on page 55
Section 6.18. – Align the Drive Belts on page 56
Section 6.19. – Replace the Drive Belts on page 56
Section 6.20. – Repack the Wheel Bearings with Grease on page 56
Section 6.21. – Inspect and Service the Hand Winch and Lift Cable on page 57
6.15. Replace the Conveyor Belt on page 53
Section 6.22. – Pinion Gear Adjustment on page 57
6.3. Visually Inspect the Equipment
Check the following during a visual inspection:
1. Ensure all guards are in place and in good working order.
2. Examine the conveyor for damage or unusual wear.
3. Check tightness of bolts/nuts, fasteners, and hardware (re-torque if necessary).
4. Be sure all safety decals are in place and are legible.
5. Check that the discharge and intake area are free of obstructions.
6. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangled
material.
7. Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace where necessary.
8. Examine tires for gashes, uneven wear, or loss of air pressure. Maintain pressure according to tire sidewall
recommendations.
9. Check all operating, lifting, and transport components. Replace damaged or worn parts before using the
conveyor.
PORTABLE GRAIN BELT CONVEYOR – S-DRIVE FIELD LOADER
6. MAINTENANCE
