BATCHEN C2000-DE, Installer Manual, Page: 20 / 30

BATCHEN
Issue Date 2/11/01 QMAN0043 Installers Manual CII & C2000 Rev A.doc - 20 -
MODE KEY:
Normal Mode $5 $10 $20 C(lear)
Function Mode SERVICE MANAGER,
or
SHIFT DIGIT
DOWN UP
Note: In a dual hose dispenser either of the keypads may be used for the
Manager/Service/Calibration functions i.e. when in Function mode the
keypads are not hose specific.
Note: If the dispenser is a non pre-set model, the keypad is hidden. The location of
the keys is indicated by breaks in the decal lined graphics pattern or four white
dots. The table above shows the keys in order from the left.
Alternatively a Keyboard Template may be used - see Installation Accessories
& Tools section.
To select different Manager/Service functions, repeatedly press the respective
SERVICE or MANAGER key until the appropriate function message is displayed in
the transaction displays.
To select different Calibration functions, repeatedly press the CAL(ibration) key until
the appropriate function message is displayed in the transaction displays. The
CAL(ibration) key (SW2) is located in the upper left hand corner of the Computer
PCB, behind a Weights & Measures sealing cover (see photograph below).
Note: Selection of functions follows the same pattern for all functions:
*
Enter Function mode as above.