7
English
g. Check the safe operating condition of
the Nexxsaw, in particular the guide bar
and the saw chain, before each
operation.
h. Always have a safe stand when working
with the saw.
i. Hold the machine firmly and securely
when switching on.
j. Make sure the guide bar and the saw
chain must be free when switched on
and must not come into contact with
the workpiece to be cut.
k. Keep your hands away from the sawing
area. Do not reach under the workpiece.
Contact with the saw chain may result
in injury.
l. Guide the Nexxsaw onto the workpiece
only when switched on. Otherwise there
is a risk of kick-back if the saw chain
gets caught in the workpiece.
m. When sawing, the base plate must
always face against the workpiece. The
saw chain can become jammed and
lead to loss of control over the machine.
n. When the cut is completed, switch off
the machine and then pull the saw
chain out of the cut only after it has
come to a standstill. This way you can
avoid kick-back.
o. Clamp the material to be processed
well. Do not support the workpiece with
your hand or foot. Do not touch objects
or the floor with the saw running. Dan-
ger of kick-back.
p. When sawing converted timber and thin
branches always use a strong support,
such as a sawing trestle. Do not stack
timber pieces.
q. Before cutting logs, secure the logs in
position.
r. When working on sloping ground, make
sure to work facing upwards.
s. Be particularly careful when cutting
splintered wood. Splinters of wood can
be torn along by the saw chain and
increase the risk of injury!
t. Foreign objects such as nails, screws,
metal parts, sand, etc. lead to increased
wear on the guide bar and saw chain.
u. A blunt saw chain can cause overheat-
ing and damage to the motor.
v. Always pull out the battery when check-
ing the chain tension, to re-tighten it, to
mount the saw chain and to eliminate
faults! Also remove the battery if you do
not use the machine temporarily.
3. Safety instructions for chain
saws
a. Keep all parts of the body away from
the saw chain when the saw is operat-
ing. Before you start the saw, make
sure the saw chain is not contacting
anything.
A moment of inattention
while operating the saw may cause
entanglement of your clothing or body
with the saw chain.
b. Hold the saw by insulated gripping
surfaces only, because the saw chain
may contact hidden wiring.
Saw chains
contacting a “live” wire may make
exposed metal parts of the saw “live”
and could give the operator an electric
shock.
c. Wear eye protection Further protective
equipment for hearing, head, hands,
legs and feet is recommended.
Ade-
quate protective equipment will reduce
personal injury from flying debris or
accidental contact with the saw chain.
d. Always keep proper footing and oper-
ate the saw only when standing on
fixed, secure and level surface.
Slip-
pery or unstable surfaces may cause a
loss of balance or control of the saw.
e. When cutting a limb that is under ten-
sion, be alert for spring back.
When
the tension in the wood fibres is
released, the spring-loaded limb may
strike the operator and/or throw the
saw out of control.
f. Use extreme caution when cutting
brush and saplings.
The slender mate-
rial may catch the saw chain and be
whipped toward you or pull you off
balance.
g. Carry the saw by the handle with the
saw switched off and away from your
body. When transporting or storing the
saw, always fit the guide bar cover.
7063578-Nexxsaw-Ma-WoF-1910-08.indb 7
15-10-19 17:12
Summary of Contents for ?MAXXPACK ?Nexxsaw?BT-NXS001
