12
|
GB
Wait for the main menu to come up. Select [1.DTC] from the main menu by pressing the
Read
button.
If there are no Diagnostic Trouble Codes retrieved, the display shows:
If there are any Diagnostic Trouble Codes, then the total number of the
Fault Codes followed by that of the Pending Codes will be reported on the
display. Read the Diagnostic Trouble Codes by pressing the
Erase
(scroll
down) button.
If the trouble code is a pending code “
PD
” will be displayed. To view previous
codes, press the
Erase
(scroll down) button to scroll through to the end, and
then start from the beginning of the list.
You will find in the enclosed booklet Diagnostic Trouble Codes the definitions for the retrieved DTC(s).
The main menu has five sections:
1. DTC
Reading Diagnostic Trouble Codes
2. ERASE
Erasing Diagnostic Trouble Codes
3. I/M
Readiness Function
4. VIN
Vehicle Identification Number
5. RESCAN
Rescan
Do not erase the codes before the system has been checked completely by technicians or yourself.
ERASING CODES
If you decide to erase the DTCs, Select [2.Erase] from the main menu by
pressing the
Read
button. A message of [ERASE? YES NO] comes up as-
king for your confirmation.
Please note, with the button
Erase
you can scroll through the menu.
If you do
not
want to proceed with erasing the codes, press the
Erase
button to exit.
If you
want to erase
the codes, then press the
Read
button.
If the codes are cleared successfully, an [ERASE DONE!] message will appear on the dis-
play. Press the
Read
button to return to the main menu list.
If the codes are not cleared, then an [ERASE FAIL!] message will appear. Press the
Read
button to return to the main menu list.
Quick Erasure:
Pressing and holding the button
Erase
for about 3 seconds will allow you to erase the
DTCs more quickly than through the main menu.
SCAN
PWM
SCAN
VPW
SCAN
KWP 2000
SCAN
ISO9141
SCAN
EKWP2000
SCAN
CAN
MENU:
1.DTC
MENU:
2.ERASE
MENU:
3.I/M
MENU:
4.VIN
MENU:
5.RESCA
NO
CODES
FAULT:02
PEND:02
P0101
01/04
P0005PD
01/05
MENU
1.DTC
MENU:
2.ERASE
ERASE?
YES NO
ERASE
DONE!
ERASE
FAIL!