Bastl Instruments KOMPAS, Assembly Manual

Page: 3 / 17

1 16mHz resonator
2 100mA fuse
HARDWARE
1 14 pin DIL DIL socket - in foam
1 28 pin DIL DIL socket - in foam
3 POT LIN B100k 20mm linear potentiometer
8 PJ-301BMB jack 3.5mm
1 27 pin male
1 21 pin female
2 2x5 pin male
8 3 mm white LED
ASSEMBLY
1 M3_11,5_II spacer
1 M3_11_IA spacer
8 jack nut
8 jack washer
3 M3_6_I screw
2 M3_8_X screw
1 3 mm nut
3 knob
1 kompas_top PCB
1 kompas_bottom PCB
1 power cable
4 jumper
1 faceplate
1 allen key
BEFORE STARTING THIS KIT...
Before starting the kit, prepare the following tools:
● Soldering iron
● Multi-meter
● Flush cutters
● n2. hex screwdriver or allen key (enclosed with kit)
● Phillips screwdriver
● Wrench No. 8
● Protective eyewear
● Isopropyl a smaller and clean brush (optional)
We suggest that you work in a clean, well lit and ventilated environment to avoid accidents or losing
any of the small components. Also go through this guide briefly and make sure that you understand all
the steps before you start soldering.
3