FINAL ASSEMBLY
Congratulations! You have made it through. Now just put the boards back together, put the
faceplate
on (secured by the screw and nuts with washers) and your KOMPAS is ready to work! Oh and don’t
forget to put the
knobs
and
jumpers
on (the
led0
,
led1
,
led2
positions; 4th jumper must be left
unconnected for default operation - see picture).
Before you connect anything, make sure that your system is disconnected from power. Also double
check the polarity of the ribbon cable, the red cable should match the -12V rail both on the module
and on the bus board!
TROUBLESHOOTING
If you have any issues with the module, please check the
at our website first. You can reach us
here:
. We also provide service for the DIY stuff called Come to Daddy
(available at
).
17
