RESONATOR
Insert also the
resonator
(the orange component with 3 leads). This part is not polarized so you can
insert it in any direction.
INSERTING ICs
Next don’t forget to place
ICs
into the sockets (1x
MCP6004
, 1x
Atmega
).
There is a notch on each
IC that should match with the notch on the socket.
Installing ICs can be also a little tricky. You
should bend the IC leads in slightly with your fingers. Then press all the leads into the sockets in one
shot.
FEMALE HEADERS
As you can see
the female pinheaders left
. Hold on with these parts. You will use them in later
steps.
For now you are done with the bottom board. Make the last check that all parts are on the right place
and everything is properly soldered.
9
