SOLDERING
Start with the smallest parts -
resistors
and
diodes
. There are three values of resistors:
220R
(2x)
and
100k
(2x) and
1k
(1x) - take your time and check those values
(or you can
check the color codes if you are seasoned enough). After soldering snip the leads close to the PCB
(be sure to make this step on all remaining leads in the course of this guide).
Solder also the
diodes
. There are just two values of them:
1N4007
- the bigger one (1x) and
1N4148
(1x). Be careful,
diodes are polarized
! make sure that the marking ring on the diode body matches
the marking on the circuit board.
4
Summary of Contents for 60 KNOBS
Page 8: ...Let s solder the resonator and the fuse as well These parts are not oriented 8...
Page 9: ...9...
Page 13: ...13...
