Bend the legs of the
7805 regulator
to make them right angled and solder the regulator.
Move to soldering the
switch
now. You can solder just one leg first, adjust it by reheating and do the
rest then. Just be sure to solder it at the right angle and flat with the PCB. (
IMPORTANT NOTE
: If you
are going to clear the PCB with the isopropyl alcohol, do soldering of this part
AFTER
the cleaning.
The alcohol could damage the switch.)
6
Summary of Contents for 60 KNOBS
Page 8: ...Let s solder the resonator and the fuse as well These parts are not oriented 8...
Page 9: ...9...
Page 13: ...13...
