Installation and Maintenance Manual: Shoe Sorter
_____________________________________________________________________________________________
Installation and Mai ntenance Manual: Shoe Sorter
Published October 2019
Rev.A1
15
Figure 4-Floor Support Installation Detail
4.
Adjust the
urethane vibration damper to 3/8” to 7/16” tall (1/8” to 1/16” compression).
5.
Adjust the top of conveying surface height by adjusting the floor support.
Do not use vibration dampers for height adjustment. Excessive compression can
damage the vibration dampers and will increase vibrations transmitted into the
floor supports.
5.1.3
Section Fastening and Rail Alignment
1.
See Figure 5 for details on fastening sections together.
2.
Use of a laser level is recommended to set the sorter straight and level.
The sorter must be level front-to-back, side-to side, and all sections must be aligned
straight to within the tolerances specified in step 3. Misalignment can cause noisy
operation and/or damage to the chain, bearings, and slats.
