Basler slA1000-30fm, User Manual, Page: 139 / 166

Standard Features
Basler scout light 131
9.12.4 Selecting the Startup Set
You can select the default configuration set (i.e., whichever was selected as the default
configuration set, either the Standard Factory Setup or the High Gain Factory Setup) or one of the
user configuration sets stored in the camera’s non-volatile memory to be the "startup set". The
configuration set that you designate as the startup set will be loaded into the active set whenever
the camera starts up at power on or after a reset.
The User Set Default Selector is used to select the startup set:
„
Set the User Set Default Selector to User Set 1, User Set 2, User Set 3 or Default.
You can set the User Set Default Selector from within your application software by using the pylon
API. The following code snippet illustrates using the API to set the selector:
Camera.UserSetDefaultSelector.SetValue( UserSetDefaultSelector_Default );