Basler BE1-50/51B-217, Instruction Manual

Page: 14 / 49

BE1-50/51B-217 General Information
1-9
AUX Output - Continued
Inductive:
120/240 Vac, Make and carry 30 amperes for 0.2 seconds, carry 7 amperes
125/250 Vdc continuously, and break 0.3 ampere. (L/R = 0.04).
Isolation Meets IEC 255-5 and exceeds IEEE C37.90-1989, one-minute dielectric
(high potential) tests as follows:
All circuits to ground: 2828 Vdc
Input to Output Circuits 2000 Vac or 2828 Vdc
Surge Withstand Capability
Oscillatory Qualified to IEEE C37.90.1-1989
5VCPFCTF 5WTIG9KVJUVCPF
%CRCDKNKV[59%6GUVUHQT2TQVGEVKXG4GNC[UCPF4GNC[5[UVGOU
Fast Transient
Qualified to IEEE C37.90.1-1989
Standard Surge Withstand
Capability (SWC) Tests for Protective Relays and Relay
Fast Transient Qualified to IEEE C37.90-1989.
Impulse Test Qualified to IEC 255-5.
Radio Frequency Field tested using a five watt, hand held transceiver operating at random
Interference (RFI) frequencies centered around 144 megahertz and 440 megahertz, with the
antenna located six inches from the relay in both horizontal and vertical
planes.
Temperature Operating Range
-40
(
C (-40
(
F) to 70
(
C (158
(
F)
Recommended Storage Range
-50
(
C (-58
(
F) to 50
(
C (122
(
F).
Shock 15 g in each of three mutually perpendicular planes.
Vibration 2 g in each of three mutually perpendicular planes swept over the range of
10 to 500 hertz for a total of six sweeps, 15 minutes each sweep.
Weight 8.6 pounds.
CHARACTERISTIC CURVES
Figures 1-7 through 1-15 illustrate the characteristic curves that are programmed into the nonvolatile
memory of this relay. To order full-size drawings of these characteristic curves, contact the Customer
Service Department of the Power Systems Group, Basler Electric, and request the 99-(4 digit) number
associated with each graph. These graphs are full size characteristic curves on transparent paper (vellum).