Basler acA2000-165, User Manual

Page: 68 / 272

Physical Interface AW00123402000
58 Basler ace USB 3.0
As shown in Figure 36, shows the applicable electrical circuit when a GPIO line is set to operate as
an output. The figure is drawn to specifically apply to pin 1 (Line 3) as an example but, with the
necessary modifications, it equally applies to pin 3 (Line 4).
For more information about GPIO pin assignments and pin numbering, see Section 5.2.1 on
page 46 .
For more information about setting the GPIO line operation, see Section 5.11 on page 65 and
Section 5.12 on page 69 .
6-pin
Receptacle
1
6
3
4
2
5
FPGA Output
+3.3 VDC
(Typical)
Pull Up Resistor
Camera
Your
Gnd
+3.3 to +24
VDC
Voltage
Output
Signal
to You
Fig. 36: Direct-coupled GPIO Line Schematic with the GPIO Line Set as an Output and with a Typical Voltage
Output Circuit (Illustration for Pin 1 as an Example; Simplified)