manualshive.com logo in svg

Basler acA2000-165, User Manual

Share
Download
Basler acA2000-165 User Manual Download Page 45

AW00123402000

Installation  

Basler ace USB 3.0

35

2 Installation

The information you will need to do a quick, simple installation of the camera and related software 
is included in the Quick Installation Guide for ace USB 3.0 Cameras (AW0012350x000). The 
document also includes information about suitable USB 3.0 host controller chipsets.

You can download the Quick Installation Guide from our website:

 www.baslerweb.com

The camera is designed to be connected to a USB 3.0 port installed in your PC. 
When connected to a USB 2.0 port, the Basler ace USB 3.0 camera will be 
detected but will not operate.

Note: We highly recommend using components such as host adapters with 
specific chipsets, cables, and hubs that are offered as Basler accessories. They 
were extensively tested for optimum performance.

For more information about recommended components, see the "Recommended 
Accessories for Basler USB 3.0 Cameras" specification (DG001115xx000).

For downloadig the specification and for more information about accessories 
available from Basler and about purchasing, go to the Basler website: 

www.baslerweb.com

Summary of Contents for acA2000-165

















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands