Basler acA2000-165, User Manual

Page: 121 / 272

AW00123402000 Image Acquisition Control
Basler ace USB 3.0 111
You can use the Basler pylon API to set the Exposure Time parameter value from within your
application software. The following code snippet illustrates using the API to set the parameter value:
// Set the exposure time to 40.0 µs
camera.ExposureTime.SetValue(40.0);
You can also use the Basler pylon Viewer application to easily set the parameter.
For more information about the pylon API and pylon Viewer, see Section 3.1 on page 37 .
acA1920-25um/uc, acA2500-14um/uc, acA3800-14um/uc, acA4600-10uc Only
You must specify an exposure time by setting the camera’s Exposure Time parameter.
The minimum setting, the maximum possible exposure time and the increment that can be set are
shown in Table 22.
You can use the Basler pylon API to set the Exposure Time parameter value from within your
application software. The following code snippet illustrates using the API to set the parameter value:
// Set the exposure time to 3500 µs
camera.ExposureTime.SetValue(3500.0);
You can also use the Basler pylon Viewer application to easily set the parameter.
For more information about the pylon API and pylon Viewer, see Section 3.1 on page 37 .
Camera Model Minimum Allowed
Exposure Time
Maximum Possible
Exposure Time
Increment
acA1920-25um/uc 35 µs 9999990 µs 35 µs
acA2500-14um/uc 35 µs 9999990 µs 35 µs
acA3800-14um/uc 35 µs 1460000 µs 1 µs
acA4600-10uc 35 µs 1460000 µs 1 µs
Table 22: Minimum Allowed Exposure Time Setting, Maximum Possible Exposure Time Setting and Increment