Basler Vision Technologies Sprint Series, User Manual

Page: 70 / 236

Line Acquisition Modes
60 Basler sprint Mono Cameras
Enabling Horizontal Binning
You can enable horizontal binning with the Camera Configuration Tool Plus (CCT+) or by using
binary write commands from within your own application to set the camera’s control and status
registers (CSRs).
With the CCT+
With the CCT+ (see Section 7.1 on page 156 ), you use the Horizontal Binning parameter in the
Output Mode parameters group to enable horizontal binning.
By Setting CSRs
You enable horizontal binning by writing the appropriate value to the Mode field of the Horizontal
Binning CSR (see
page 168 ).
Section 7.2.2 on page 164 explains CSRs and Section 7.3.1 on page 197 explains using read/write
commands.