Basler Vision Technologies Sprint Series, User Manual

Page: 35 / 236

Physical Interface
Basler sprint Mono Cameras 25
2.2 Connector Pin Assignments and
Numbering
2.2.1 Pin Assignments for the MDR Connectors
The pin assignments for MDR Connector 1 (see Figure 12 on page 24 ) are shown in Table 5. The
pin assignments for MDR connector 2 are shown in Table 6.
1
Pins 1, 13, 14, and 26 are all tied to ground inside of the camera.
Pin Number Signal Name Direction Level Function
1, 13, 14, 26
1 Gnd Input Ground Ground for the inner shield of the cable
2 X0- Output Camera Link
LVDS Data from the Camera Link transmitter
15 X0+
3 X1- Output Camera Link
LVDS Data from the Camera Link transmitter
16 X1+
4 X2- Output Camera Link
LVDS Data from the Camera Link transmitter
17 X2+
6 X3- Output Camera Link
LVDS Data from the Camera Link transmitter
19 X3+
5 XClk- Output Camera Link
LVDS Transmit clock from the Camera Link transmitter
18 XClk+
7 SerTC+ Input RS-644
LVDS Serial communication data receive
(SerTC = "serial to camera")
20 SerTC-
8 SerTFG- Output RS-644
LVDS Serial communication data transmit
(SerTFG = "serial to frame grabber")
21
9 CC1- Input RS-644
LVDS ExSync (external trigger)
22 CC1+
10 CC2+ Input RS-644
LVDS
Not used
23 CC2-
11 CC3- Input RS-644
LVDS
Not used
24 CC3+
12 CC4+ Input RS-644
LVDS
Not used
25 CC4-
Table 5: Pin Assignments for MDR Connector 1