GF Health Products, Inc. - www.grahamfield.com
Zenith Series Service Manual 999-0831-190C DEC. 2013
ZENITH SERIES
15
NOTE:
THE APS 9000 PENDANT CAN BE PLUGGED INTO THE T-CABLE PLUGS ON EITHER SIDE OF THE BED FOR
EASY ACCESS. THE OPPOSITE SIDE OF THE T-CABLE SHOULD ALWAYS HAVE THE PROVIDED CAP ATTACHED
FOR SAFETY.
THE TWO VERTICAL ENDS OF THE DOUBLE T-CABLE RUN TOWARD THE FOOT END OF THE BED, WITH ONE
VERTICAL END PLUGGING DIRECTLY INTO THE CONTROL BOX (OR UNDERBED LIGHT BOX IF YOUR BED HAS
THAT FEATURE) AND THE OTHER LONGER END RUNS ALONG THE TIE ROD AND EXTENDS OUT THE FOOT END
AND PLUGS INTO YOUR STAFF/NURSE CONTROL CABLE.
THE HAND CONTROLLER DOES NOT FEATURE ANY TRENDELENBERG OR REVERSE TRENDELENBERG BUTTONS.
CONTROLS FOR THIS FEATURE ARE ONLY INCLUDED ON THE STAFF/NURSE CONTROLLER FOR OPTIMUM
SAFETY FOR THE PATIENT.
Backlit
Pendant
includes
removable
attachment
hook.
A Pendant
holster also
comes
standard
with the
APS bed.
BACKLIT PENDANT
Linak Model #HB8545V3203-61
BAMP Part # 999-0806-301
Backlit and includes
Underbed Light Button
BACKLIT PENDANT
1
HEAD DECK ANGLE UP BUTTON
2
HEAD DECK ANGLE DOWN BUTTON
3
HI/LO UP BUTTON (RAISE ENTIRE BED)
4
HI/LO DOWN BUTTON (LOWER ENTIRE BED)
5
KNEE & FOOT DECK ANGLE UP BUTTON
6
KNEE & FOOT DECK ANGLE DOWN BUTTON
7
SET TO CHAIR POSITION BUTTON
8
UNDO CHAIR POSITION BUTTON
9
OPTIONAL UNDERBED LIGHT BUTTON
OPERATION:
1. To angle the Head Deck upward, PRESS 1.
2. To angle the Head Deck downward, PRESS 2.
3. To raise the Bed Up horizontally, PRESS 3.
4. To lower the Bed Down horizontally, PRESS 4.
5. To angle the Knee/Foot Decks upward, PRESS 5.
6. To angle the Knee/Foot Decks downward, PRESS 6.
7. To put the Bed in the Chair position, PRESS 7.
8. To release the Bed from the Chair position, PRESS 8.
9. To turn the underbed light on or off PRESS THE LIGHT.
BULB ICON near the bottom of the hand controller.
APS PENDANT/HAND CONTROLLER OPERATION
BED MODELS APS98174, APS981741 & APS981742
9
Under Bed
Light Button
