FOOT END
FOOT END of Matrix 4000 Series Bed Shown with
Pedal Lock Engaged (RED DOWN = LOCKED POSITION)
GREEN DOWN = ROLL
RED DOWN = LOCKED
MATRIX 4000 / 6000 SERIES WIREFORM WALLSAVER INSTALLATION
WALLSAVER ASSEMBLY
1. Position the Wireform Wallsaver
with bent end facing upward and
tab ends facing inward as shown at
right.
2. Determine the position desired (see
WALLSAVER POSITIONS below).
3. Gently squeeze the wallsaver tab
ends inward toward the center of
the wallsaver and, holding the tabs
parallel with the caster base holes,
slide the tabs into the holes while
letting the wallsaver gently expand
outward.
4. Turn the wallsaver downward until it
rests on the floor.
WALLSAVER REMOVAL
1. To remove or move the wallsaver to
a new position, raise the wallsaver
off the floor until the end tabs are
horizontal.
2. Squeeze the ends toward the center
of the wallsaver until the end tabs
slide out of the caster base holes.
WALLSAVER POSITIONS
There are two positions for the Matrix series wallsaver. Holes nearest the center of the bed are for both 76" and 80" beds,
and the holes closest to the head end are for use when a Trapeze Adapter is added to the bed.
The Standard Wallsaver will prevent the bed from making contact with the wall in all positions except Trendelenburg. If the
Advanced Positioning
(APS) bed is to be used in Trendelenburg position, the Trendelenburg Wallsaver must be used to
prevent the bed from making contact with the wall.
A Trendelenburg Wallsaver is available when the bed is ordered with a Staff Control
with Advanced Positioning
.
MATRIX 4000 / 6000 SERIES —
OPERATING THE CASTER PEDAL
LOCK MECHANISM
LOCKED POSITION
To lock the foot end casters, step on the red pedal until the
caster lock engages.
UNLOCKED POSITION
To unlock the foot end casters, step on the green release pedal
until the caster lock disengages.
GF Health Products, Inc. - www.grahamfield.com
Matrix Series Instructions for Use 999-0908-190A
15
MATRIX SERIES
A Graham-Field
®
Family Brand
