MATRIX 4000 SERIES FOOTBOARD
INSTALLATION
1. The footboard may come with four
pre-installed inserts - if not already installed,
assemble the four inserts into the outside of
the footboard as shown above.
2. Position a right (#1) and left (#2) mounting
bracket on the inside of the footboard with
footboard mounting holes facing outward as
shown above.
3. Align the bracket top holes with the
footboard top holes.
4. Insert a screw (#4) through each of the top
holes and bottom holes and screw into each
insert. Tighten loosely (hand tight) until after
brackets are fastened to the bed frame.
* For residents taller than 185 cm (6' 1"),
a 4" Length Extension Kit is available.
Please contact Customer Service for more
information.
5. At the foot deck end, slide the brackets into
the main frame rail hollow ends.
6.
FOR 80" BEDS:
Slide the mounting brackets
in until the bracket hole aligns with the
first rail hole as shown above. 76" and 80"
bracket labels will be visible. Pin brackets
to frame with Clevis Pins and Hair Pins
provided.
7.
FOR 76" BEDS:
Slide the mounting brackets
in until the bracket hole aligns with the
second rail hole as shown above. Only 76"
bracket label will be visible. Pin brackets
to frame with Clevis Pins and Hair Pins
provided.
8. Tighten screws with the hex key included in
the kit.
GF Health Products, Inc. - www.grahamfield.com
Matrix Series Instructions for Use 999-0908-190A
11
MATRIX SERIES
A Graham-Field
®
Family Brand
